# How to set up the Capsul MB3300 multifunction printer

Source: https://www.capsuloffice.com/support/mb3300/setup  
Official Capsul setup steps, from the MB3300 quick start guide. Questions: support@capsuloffice.com

## Get it ready

1. **Unpack the printer.** Inside the box: the printer, power cord, USB cable, and a CD with the driver and manual. Keep the box and packing for future moves.
2. **Remove the packing.** Remove the tape from the document feeder and the paper tray. Take out the packing inside the front cover and under the document cover.
3. **Remove the shipping spacers.** Open the rear cover and remove the orange spacer on each side of the paper path. They protect the printer during shipping.
4. **Get the toner ready.** Open the front cover and pull out the drum and toner by its handle. Remove the tape and label from the drum, and pull the toner’s seal all the way out. Tilt the toner up and down, then side to side, 10 times. Click the toner into the drum, slide the assembly in, press the toner down, and close the cover. Don’t touch the drum’s surface, and don’t leave the drum out in the light for more than a few minutes.
5. **Load paper.** Pull out the tray, slide the guides to your paper size, and load paper print side down. Push the tray back in and lift the paper stopper.
6. **Turn it on.** Plug in the power cord and press the power button. Its light stays on while the printer is on. To turn it off, hold the power button for 3 seconds.

## Connect to Wi-Fi

1. Find the printer’s network name next to the Wi-Fi symbol on its screen, or press Menu › Information › AP Mode SSID. It looks like PRT-53BEFD.
2. On your phone, open Settings › Wi-Fi and join that network. A “no internet” warning is normal.
3. Open your phone’s web browser and go to 192.168.200.1.
4. Tap Properties at the top right, then Wi-Fi settings › Search AP. Choose your network, enter its password, and tap Connect. A notice that the wired network will turn off is normal.
5. The printer’s IP address appears on its screen. Switch your phone back to your usual Wi-Fi.

Detailed Wi-Fi steps: https://www.capsuloffice.com/support/mb3300/wifi-setup

## Print, no driver needed

- **Windows:** Open Settings › Printers & scanners. Select Add device (Add a printer or scanner on Windows 10), then choose the Capsul MB3300.
- **Mac:** Open System Settings › Printers & Scanners. Click Add Printer, Scanner, or Fax, then choose the Capsul MB3300.
- **iPhone or iPad:** Open the document, tap Share, then Print. Choose the Capsul MB3300 and tap Print.
- **Android:** Install Mopria Print Service from Google Play. Choose Print in your app, then pick the Capsul MB3300.

## Other ways to connect

- **Network cable:** Plug a cable from your router into the LAN port on the back. The IP address shows on the screen once it connects.
- **USB cable:** For one computer. Install the driver first, and plug in the cable only when the installer asks for it.
- **Driver (optional):** Only needed to scan to your computer or to print over USB. Download it below.

## Questions

**Do I need a driver for the MB3300?**  
No, not for everyday printing. Once the MB3300 is on your network, Windows, Mac, iPhone, iPad, and Android print to it with what’s already built in. The driver is only needed to scan to your computer or to print over USB.

**How do I connect the MB3300 to Wi-Fi?**  
Find the printer’s network name next to the Wi-Fi symbol on its screen, or press Menu › Information › AP Mode SSID. It looks like PRT-53BEFD. On your phone, open Settings › Wi-Fi and join that network. A “no internet” warning is normal. Open your phone’s web browser and go to 192.168.200.1. Tap Properties at the top right, then Wi-Fi settings › Search AP. Choose your network, enter its password, and tap Connect. A notice that the wired network will turn off is normal. The printer’s IP address appears on its screen. Switch your phone back to your usual Wi-Fi. Full steps: https://www.capsuloffice.com/support/mb3300/wifi-setup

**How do I find the MB3300’s IP address?**  
After the printer joins Wi-Fi, its IP address appears on its screen. On a network cable, the address shows on the screen once it connects.

**How do I turn off the MB3300?**  
Hold the power button for 3 seconds.

**Who can help me set up my MB3300?**  
Email Capsul Support at support@capsuloffice.com. The team handles common setup questions like Wi-Fi and driver installation. For network or operating-system problems, your IT provider is the best first call.

## Downloads

- [Quick start guide](https://c43df7a1-8a12-4abb-96cd-6cca897b505b.usrfiles.com/ugd/d69529_d17c536ba0c845169da3e43615a652f9.pdf) (PDF · 0.4 MB)
- [Wi-Fi setup guide](https://c43df7a1-8a12-4abb-96cd-6cca897b505b.usrfiles.com/ugd/d69529_fe977ba989b9446aafd3b38f75550111.pdf) (PDF · 0.2 MB)
- [User’s manual](https://c43df7a1-8a12-4abb-96cd-6cca897b505b.usrfiles.com/ugd/d69529_624b6b75b11b44f7a712ff44b749e81e.pdf) (PDF · 11 MB)
- [Windows driver](https://c43df7a1-8a12-4abb-96cd-6cca897b505b.usrfiles.com/archives/d69529_3342f996448f43f29da736d1c4033d1c.zip) (ZIP · February 2025)

## Get help

Capsul Support helps with setup questions like Wi-Fi and driver installation. Email support@capsuloffice.com and include your model and serial number. For network or operating-system problems, your IT provider is the best first call. Downloads, warranty, and more: https://www.capsuloffice.com/support