Set up the Capsul MB4500
Unpack it, install the toner, load paper, connect to your network, and print with no driver. These are the steps from the MB4500 quick start guide.
Need a hand? Email support@capsuloffice.com.
Get it ready
Six steps from box to power on. Keep the box and packing in case you ever move or ship the printer.
Quick start guidePDF · 0.6 MB · print it and keep it by the printer- 1UnpackSet the printer on a flat, sturdy surface with about 4 in. (10 cm) of space behind it. The toner cartridge, power cord, USB cable, and CD come in the box.
- 2Remove all tape and packingPeel off every strip of tape, including the strips under the document feeder cover. Take the packing sheet off the scanner glass and the cushion out of the paper tray. Keep the box in case you ever ship the printer.
- 3Take out the two shipping spacersThey lock the paper path and are easy to miss. Open the rear cover, pull down both ends of the paper path and the two green release arms, and pull out both spacers. Close the cover.
- 4Install the tonerOpen the front cover, pull out the drum unit by its handle, and remove the tape and protective sheets. Take the cover off the new toner, pull the seal all the way out, and tilt it up and down, then left and right, 10 times. Click the toner into the drum unit, slide them back in together, press down until they lock, and close the cover. Don’t touch the drum surface or the toner rollers.
- 5Load paperPull out the main tray, set the guides to your paper, and load up to 550 sheets print side down. Push the tray back in. Using Letter paper? Tap the gear, then Show Machine Status › Tools › Device Settings › Tray Contents, and set the paper size there.
- 6Plug in and power onPlug the cord into the printer and a grounded wall outlet, not an extension cord, and press the power button. To turn the printer off, hold the button for 3 seconds.
Connect to Wi-Fi
Connect from the touchscreen, or plug in a network cable.
- Tap the gear at the top right of the home screen, then Show Machine Status.
- Open the Tools tab, tap Network Settings, then tap Enable.
- Choose Wi-Fi Station Mode and tap Save.
- Open Wi-Fi in the Network Settings list, pick your network, and enter its password.
Find the printer’s IP address: gear › Show Machine Status. Look for IP Address (network cable) or Wi-Fi Address.
Stuck on a step? Capsul Support helps with setup questions like Wi-Fi and driver installation. Email support@capsuloffice.com and include your model and serial number.
Email supportPrint. No driver needed.
Computers and phones on the same network as the MB4500 print with what’s already built in.
- Windows 10 and 11Open Settings › Printers & scanners, select Add device, and choose the MB4500 when it appears. Windows sets it up for you.
- MacOpen System Settings › Printers & Scanners › Add Printer. Select the MB4500 and click Add. It prints with AirPrint.
- iPhone and iPadIn any app, tap Share › Print. Tap Select Printer, choose the MB4500, and tap Print. That’s AirPrint, built in.
- AndroidInstall Mopria Print Service from Google Play and turn it on. Then choose Print in any app and pick the MB4500.
Other ways to connect
- Network cablePlug a network cable into the LAN port on the back. In Network Settings, choose Ethernet and tap Save. The printer gets its address on its own.
- No Wi-Fi network?Choose Wi-Fi AP Mode, or Ethernet + Wi-Fi AP Mode, and the printer makes its own network. Its name is listed under Wi-Fi SSID on the Machine Information screen. Join it from your phone.
- USB cableFor one computer. Install the driver first and connect the cable when the installer asks.
- Driver (optional)Most setups don’t need it. Get it to scan into a computer app, connect by USB, or meet an IT policy that requires a vendor driver. Email Capsul Support at support@capsuloffice.com for the MB4500 driver.
MB4500 setup questions
Do I need a driver for the MB4500?
Most setups don’t. Windows, Mac, iPhone, iPad, and Android already know how to print to the MB4500 when they’re on the same network. Get the driver only to scan into a computer app, connect by USB, or meet an IT policy that requires a vendor driver.
How do I connect the MB4500 to Wi-Fi?
Tap the gear at the top right of the home screen, then Show Machine Status. Open the Tools tab, tap Network Settings, then Enable. Choose Wi-Fi Station Mode and tap Save, then open Wi-Fi in the Network Settings list, pick your network, and enter its password.
How do I find the MB4500’s IP address?
Tap the gear at the top right of the home screen, then Show Machine Status. Look for IP Address if you use a network cable, or Wi-Fi Address on Wi-Fi.
Can I connect the MB4500 without a Wi-Fi network?
Yes. In Network Settings, choose Wi-Fi AP Mode and the printer makes its own network. Its name is listed under Wi-Fi SSID on the Machine Information screen, and phones and laptops can join it to print.
Can the MB4500 scan without a computer?
Scan to a USB flash drive right from the touchscreen. For scan to email or a network folder, type the printer’s IP address into a browser and set them up on its web page. The user’s manual covers the mail server settings.
How do I set the paper size to Letter?
Tap the gear, then Show Machine Status › Tools › Device Settings › Tray Contents, and choose Letter.
How do I turn off the MB4500?
Hold the power button for 3 seconds.
Who can help me set up my MB4500?
Email Capsul Support at support@capsuloffice.com. The team handles common setup questions like Wi-Fi and driver installation. For network or operating-system problems, your IT provider is the best first call.
MB4500 guides and downloads
About the MB4500 →Still stuck? Capsul Support can help.
Our team handles common setup questions like Wi-Fi and driver installation. For network or operating-system problems, your IT provider is the best first call. For repairs, contact a service provider or start a warranty claim.